Drip irrigation system production line

Drip Irrigation Kit including drip irrigation hose and drip irrigation emitters.

drip irrigation parts are used for:

  • commercial drip irrigation system
  • homemade drip irrigation system

ONGREAT injection moulding manufacturer is a professional drip irrigation line suppliers also, who can provide you drip irrigation system design, with a complete production line solution for drip irrigation tapes.

What is a drip irrigation system?

Drip irrigation tape uses plastic pipe (drip irrigation pipe) to send water through the orifice or dripper on the capillary tube with a diameter of about 10mm to the crop root for local irrigation.

The water drips evenly and slowly into the soil near the roots of the crop through a dripper or drip irrigation belt with a very small inlet orifice.Drip system production line workshop

It is the most effective water-saving irrigation method in dry and arid regions, and its water utilization rate can reach 95%.

Classification of drip irrigation system

  • Inlay type
  • Labyrinth type

The inlay drip irrigation tape is a drip irrigation tape in which a pre-manufactured drip tip is embedded in the capillary during the capillary manufacturing process,

such as a patch drip irrigation tape and an embedded cylindrical drip irrigation pipe.

And the thin-wall drip irrigation tape is a heat-sealing drip outlet of various shapes of decompression runners at one side or the middle of the tube,

such as a labyrinth drip irrigation belt and a blue track drip irrigation belt.

Uses of drip irrigation systems

Drip irrigation has a higher water-saving and yield-enhancing effect than sprinkler irrigation.

At the same time, it can be combined with fertilization to increase the fertilizer efficiency by more than double.

It can be used for irrigation of fruit trees, vegetables, cash crops, garden irrigation system, vegetable garden drip irrigation and greenhouses.

It can also be used for plants irrigation of field crops in dry and deficient places.

The disadvantage is that the dripper is easy to scale and block,

so the water source should be strictly filtered.Drip irrigation dripper injection mould

Inlay flat dripper drip irrigation tape

The inline flat dripper drip irrigation belt is an integrated drip irrigation belt with a flat dripper inlaid on the inner wall of the tube tape.

It is widely used in the irrigation of greenhouses, greenhouses and field cash crops.

Features

  • The dripper is integrated with the pipe belt, which is easy to install and use, low in cost and low in investment.
  • The dripper has a self-filtering window with good anti-blocking performance.
  • It adopts labyrinth flow channel, which has a certain pressure compensation effect.
  • The dripper spacing can be determined according to the user’s requirements.

Composition equipment of drip irrigation system production line

  • Plastic Injection Molding Machine
  • Injection mould
  • Single screw extruder
  • Automatic winder
  • Perforated visual inspection device
  • Rubber track traction device
  • Drip irrigation dripper automatic screening device
  • Automatic feeding device

and so on..

Want to know more, please contact us. Thank you!

We will give you the best quotation for free.

best drip irrigation kitDrip irrigation tape injection moulding production line

TestimonialsWhat They Are Saying