The performance of ONGREAT two-plate direct compression injection molding machine has reached the international advanced level.
check our online catalogInjection Molding Machine Parameter D-1000T
Item | Unit | D 1000 | |||
INJECTION UNIT | A | B | C | D | |
Screw diameter | mm | 100 | 110 | 120 | 130 |
Shot volume(theoretical) | cm3 | 4712 | 5702 | 6899 | 8348 |
Injection weight(ps) | g | 4288 | 5189 | 6279 | 7597 |
Injection rate | g/s | 660 | 798 | 966 | 1169 |
Injection pressure | Mpa | 207 | 171 | 144 | 123 |
Screw speed | rpm | 115 | |||
CLAMPING UNIT | |||||
Clamping force | kN | 10000 | |||
Open stroke | mm | 1800/1200 | |||
Space between tie bars(W×H) | mm | 1170*1070 | |||
Max.Mould height | mm | 1000 | |||
Min.Mould height | mm | 400 | |||
Ejector stroke | mm | 280 | |||
Ejector force | kN | 210 | |||
OTHERS | |||||
Max.Pump pressure | MPa | 16 | |||
Pump motor power | kW | 100+5 | |||
Heating power | kW | 54.3 | |||
Machine dimension(L×W×H) | m | 11.43*2.40*3.14 | |||
Oiltank cubage | L | 1200 | |||
Machine weight | t | 37 |