The performance of ONGREAT two-plate direct compression injection molding machine has reached the international advanced level.
check our online catalogInjection Molding Machine Parameter D-1300T
| Item | Unit | D 1300 | |||
| INJECTION UNIT | A | B | C | D | |
| Screw diameter | mm | 100 | 110 | 120 | 130 |
| Shot volume(theoretical) | cm3 | 4712 | 5702 | 6899 | 8348 |
| Injection weight(ps) | g | 4288 | 5189 | 6279 | 7597 |
| Injection rate | g/s | 660 | 798 | 966 | 1169 |
| Injection pressure | Mpa | 207 | 171 | 144 | 123 |
| Screw speed | rpm | 100 | |||
| CLAMPING UNIT | |||||
| Clamping force | kN | 13000 | |||
| Open stroke | mm | 2250/1500 | |||
| Space between tie bars(W×H) | mm | 1370*1270 | |||
| Max.Mould height | mm | 1250 | |||
| Min.Mould height | mm | 500 | |||
| Ejector stroke | mm | 325 | |||
| Ejector force | kN | 245 | |||
| OTHERS | |||||
| Max.Pump pressure | MPa | 16 | |||
| Pump motor power | kW | 120+5 | |||
| Heating power | kW | 60.9 | 67 | 73 | 75 |
| Machine dimension(L×W×H) | m | 11.5*2.6*2.85 | |||
| Oiltank cubage | L | 2000 | |||
| Machine weight | t | 58 | |||