The performance of ONGREAT two-plate direct compression injection molding machine has reached the international advanced level.
check our online catalogInjection Molding Machine Parameter D-450T
| Item | Unit | D 450 | |||
| INJECTION UNIT | A | B | C | D | |
| Screw diameter | mm | 75 | 80 | 85 | |
| Shot volume(theoretical) | cm3 | 1767 | 2010 | 2270 | |
| Injection weight(ps) | g | 1608 | 1830 | 2066 | |
| Injection rate | g/s | 382 | 442 | 499 | |
| Injection pressure | Mpa | 191 | 168 | 148 | |
| Screw speed | rpm | 160 | |||
| CLAMPING UNIT | |||||
| Clamping force | kN | 4500 | |||
| Open stroke | mm | 1400/900 | |||
| Space between tie bars(W×H) | mm | 830*730 | |||
| Max.Mould height | mm | 850 | |||
| Min.Mould height | mm | 350 | |||
| Ejector stroke | mm | 200 | |||
| Ejector force | kN | 110 | |||
| OTHERS | |||||
| Max.Pump pressure | MPa | 16 | |||
| Pump motor power | kW | 45+5 | |||
| Heating power | kW | 31.4 | |||
| Machine dimension(L×W×H) | m | 8.20*2.00*2.80 | |||
| Oiltank cubage | L | 750 | |||
| Machine weight | t | 18 | |||