The performance of ONGREAT two-plate direct compression injection molding machine has reached the international advanced level.
check our online catalogInjection Molding Machine Parameter D-800T
Item | Unit | D 800 | |||
INJECTION UNIT | A | B | C | D | |
Screw diameter | mm | 90 | 95 | 100 | 105 |
Shot volume(theoretical) | cm3 | 2735 | 3048 | 3377 | 3723 |
Injection weight(ps) | g | 2489 | 2774 | 3073 | 3388 |
Injection rate | g/s | 552 | 612 | 679 | 748 |
Injection pressure | Mpa | 184 | 165 | 149 | 135 |
Screw speed | rpm | 150 | |||
CLAMPING UNIT | |||||
Clamping force | kN | 8000 | |||
Open stroke | mm | 1700/1150 | |||
Space between tie bars(W×H) | mm | 1070*970 | |||
Max.Mould height | mm | 900 | |||
Min.Mould height | mm | 350 | |||
Ejector stroke | mm | 250 | |||
Ejector force | kN | 150 | |||
OTHERS | |||||
Max.Pump pressure | MPa | 16 | |||
Pump motor power | kW | 75+5 | |||
Heating power | kW | 42.8 | |||
Machine dimension(L×W×H) | m | 10.2*2.24*2.71 | |||
Oiltank cubage | L | 1100 | |||
Machine weight | t | 29 |